IBM 000-037 examen pratique questions et réponses

L'équipe de Pass4Test rehcerche la Q&A de test certification IBM 000-037 en visant le test IBM 000-037. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test IBM 000-037 sans aucune doute.

Choisir le Pass4Test peut vous aider à réussir 100% le test IBM 000-037 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Code d'Examen: 000-037

Nom d'Examen: IBM (IBM Tivoli Storage Manager V6.2 Implementation)

Questions et réponses: 216 Q&As

Pass4Test est un seul site de provider le guide d'étude IBM 000-037 de qualité. Peut-être que vous voyiez aussi les Q&A IBM 000-037 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test IBM 000-037 à se preuver. Mais le taux du succès et bien bas. Participer le test IBM 000-037 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Avec l'aide du Pass4Test, vous allez passer le test de Certification IBM 000-037 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de IBM 000-037, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

000-037 Démo gratuit à télécharger: http://www.pass4test.fr/000-037.html

NO.1 A customer has several remote locations with physical servers that contain Microsoft Outlook e-mail,
IBM DB2 databases, and CRM applications which are backed up nightly with IBM Tivoli Storage Manager
Backup-Archive Client. Which product(s) can be used to restore these physical servers to virtual servers
in a disaster?
A. IBM Tivoli Storage Manager FastBack
B. IBM Tivoli Storage Manager Backup-Archive Client
C. IBM Tivoli Storage Manager Client, IBM Tivoli Storage Manager for Mail
D. IBM Tivoli Storage Manager Fastback for Mail, IBM Tivoli Storage Manager for Databases, IBM Tivoli
Storage Manager FastBack for Virtual Servers
Answer: B

IBM   000-037   000-037

NO.2 A company's Service Level Agreement states that during a data restore, the Accounts Payable
department systems receive priority. Which feature expedites restoring this data?
A. Client Polling
B. Collocation by Group
C. Automatic Reconciliation
D. Dynamic Data Consolidation
Answer: B

IBM   000-037   000-037   certification 000-037   certification 000-037

NO.3 A new disk subsystem will be installed and integrated into the current IBM Tivoli Storage Manager
environment to achieve Service Level Agreement requirements. Which type of storage pool allows
multiple, concurrent processes to read and write to it simultaneously?
A. a pool with devclass=file
B. a pool with devclass=tape
C. a pool with devclass=dedup
D. a pool with devclass=random
Answer: D

IBM   certification 000-037   000-037   certification 000-037   000-037   000-037 examen

NO.4 Which method can recover an AIX operating system following a catastrophic disk loss?
A. recovery API
B. recovery DVD
C. full system restore using IBM Tivoli Storage Manager Restore API
D. bare machine recovery using IBM Tivoli Storage Manager for System Backup and Recovery
Answer: D

IBM examen   000-037 examen   000-037   000-037   000-037

NO.5 A company must limit the size and number of files stored in the storage pool. Which two features
reduce the amount of data backed up? (Choose two.)
A. Include-Exclude List
B. Journal-Based Backup
C. Client Side Backup Sets
D. Client Side Data Deduplication
E. Server Side Data Deduplication
Answer: AD

IBM   000-037 examen   000-037   000-037   certification 000-037

NO.6 A company with a very busy LAN needs to conserve storage pool space by limiting the amount of data
stored. Which feature helps the company reduce network traffic during backups?
A. simultaneous write during backups
B. simultaneous write during migration
C. server-side data deduplication with cache enabled
D. client-side data deduplication with cache enabled
Answer: D

certification IBM   000-037 examen   000-037   certification 000-037   certification 000-037

NO.7 There are three servers in an enterprise network with valuable file system data that must be backed
up by an IBM Tivoli Storage Manager (TSM) schedule. There are three file servers. How many TSM
nodes must be configured at the TSM server?
A. 1 node
B. 3 nodes
C. 5 nodes
D. 7 nodes
Answer: B

IBM examen   000-037   certification 000-037   000-037 examen   certification 000-037

NO.8 A lab has 10 workstations and data that must be backed up on just five of the workstations. How many
IBM Tivoli Storage Manager (TSM) nodes will be required to back up the workstations on the TSM server?
A. 5 nodes
B. 6 nodes
C. 7 nodes
D. 10 nodes
Answer: A

certification IBM   000-037 examen   certification 000-037   certification 000-037   certification 000-037

NO.9 A customer has a mixed environment of Windows 2003 and 2008 servers. Which methodology
ensures these machines are recoverable using a bare machine recovery procedure?
A. WSR
B. ASR
C. LVSA
D. Mksysb
Answer: B

IBM   000-037 examen   certification 000-037   000-037   000-037 examen

NO.10 How is connectivity verified between an IBM Tivoli Storage Manager V6.2 (TSM) server and TSM
client?
A. query the server from the TSM client
B. attempt a test installation of a Backup-Archive Client
C. run the system check command from the Install wizard
D. perform the network verification process in the Admin Center
Answer: A

IBM   000-037   000-037

NO.11 A new tape library with LTO5 drives has been specified to achieve faster data transfer. How are the
tape library and drives attached and configured?
A. attach the drives into the current library environment
B. define a new library with device class for the new drives
C. define a library changer and drive management classes
D. create a library setup and use the virtual library for the library management
Answer: B

IBM   000-037 examen   000-037   000-037 examen   000-037 examen

NO.12 Which statement is true for implementing an IBM Tivoli Storage Manager V6.2 (TSM) server
environment?
A. TSM server application is not supported on Mac OS; the customer must decide on another platform to
run the TSM server.
B. TSM server application on Mac OS requires an Intel processor to operate because there is no support
for Mac PowerPC.
C. TSM server application for Mac is only supported on Mac OS V10.6 and higher; but there is no SAN
Discovery available for that platform.
D. TSM server application on Mac OS V10.6 is introduced with TSM V6.2 and provides all functionality as
a TSM server on AIX, Linux, Solaris, and Windows.
Answer: A

IBM   000-037   000-037   000-037 examen   000-037

NO.13 Which protocols can be used on an IBM Tivoli Storage Manager V6.2 server on AIX?
shared memory
TCP/IP V4
TCP/IP V6
A. 1, 2
B. 2, 3
C. 1, 3
D. 1, 2, 3
Answer: D

IBM   000-037 examen   000-037

NO.14 Which products are needed on a remote server in order to back up client data in a virtual environment
that contains Exchange, MySQL, and QuickBooks?
A. IBM Tivoli Storage Manager Backup-Archive Client, IBM Tivoli Storage Manager for Mail Client
B. IBM Tivoli Storage Manager, IBM Tivoli Storage Manager for Mail Client, IBM Tivoli Storage Manager
for Databases
C. IBM Tivoli Storage Manager Backup-Archive Client, IBM Tivoli Storage Manager for VCB, IBM Tivoli
Storage Manager for Mail
D. IBM Tivoli Storage Manager Backup-Archive Client, IBM Tivoli Storage Manager for Mail Client, IBM
Tivoli Storage Manager for VMWare
Answer: A

IBM examen   000-037   000-037 examen   000-037

NO.15 After physically verifying that all server, disk, tape, and communication hardware are installed and
operating with all internal interfaces, how is each component verified to be seen by the server operating
system as functioning properly prior to installing IBM Tivoli Storage Manager V6.2 (TSM)?
A. Ensure the GUI interface is running.
B. Run the CHECKIT command in the TSM Installation Wizard.
C. Utilize the Operating System Configuration Manager or Device Manager.
D. Run the administrative command line from the server to ensure all devices are working.
Answer: C

IBM examen   certification 000-037   000-037 examen   000-037

NO.16 A company is creating an archive retention server and has a requirement that archives cannot be
deleted before the retention period has passed. Which command prevents an archived object from being
deleted?
A. SET ARCHIVELOCK ON
B. SET RETENTIONLOCK ON
C. SET ARCHIVERETENTIONLOCK ON
D. SET ARCHIVERETENTIONPROTECTION ON
Answer: D

IBM examen   000-037   certification 000-037   000-037   certification 000-037   000-037

NO.17 What is the minimum memory requirement for an IBM Tivoli Storage Manager V6.2 server (Windows,
Linux, AIX) environment when using deduplication?
A. 8 GB
B. 12 GB
C. 16 GB
D. 24 GB
Answer: C

IBM examen   certification 000-037   000-037   000-037

NO.18 A company is mandated to retain all archived data for seven years. Which two parameters must be
added to the DEFINE COPYGROUP command to support this policy? (Choose two.)
A. RETMIN=7
B. RETVER=2555
C. MODE=ARCHIVE
D. TYPE=ARCHIVE
E. RETINIT=CREATION
Answer: BD

IBM   000-037 examen   certification 000-037   certification 000-037

NO.19 Which parameter is used with the DEFINE COPYGROUP command to specify the number of days to
retain a backup version after that version becomes inactive due to a new active version?
A. RETMIN
B. RETVER
C. RETONLY
D. RETEXTRA
Answer: D

IBM examen   000-037 examen   000-037   000-037   000-037 examen   certification 000-037

NO.20 A TS3500 library has been provided for use with IBM Tivoli Storage Manager V6.2 (TSM) for AIX.
Which action must be performed before the library and drives can be defined by TSM?
A. install Atape device drivers, then run cfgmgr
B. install tapeutil device drivers, then run cfgmgr
C. install Atape device drivers, then run define dev for the library and each tape drive
D. install tapeutil device drivers, then run define dev for the library and each tape drive
Answer: A

IBM   certification 000-037   certification 000-037   000-037   certification 000-037

NO.21 A company with a large number of clients frequently runs out of available tape drives during storage
pool backups. How can they reduce the number of mount points used?
A. simultaneous storage pool backups
B. simultaneous write during migration
C. simultaneous storage pool expiration
D. simultaneous write during reclamation
Answer: B

IBM   000-037 examen   000-037   000-037 examen   000-037   000-037

NO.22 A customer needs to protect and save critical Microsoft Exchange e-mail data for three years. They
also need to protect other files, Oracle databases, and VMWare servers for at least 30 days. Which
products should the customer implement in order to protect their environments?
A. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for Databases, IBM Tivoli
Storage Manager for Mail
B. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for VCB, IBM Tivoli Storage
Manager for Databases, IBM Tivoli Storage Manager for Mail
C. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for Databases, IBM Tivoli
Storage Manager for VCB, IBM Tivoli Storage Manager for Exchange
D. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for Oracle Database, IBM
Tivoli Storage Manager for Exchange, IBM Tivoli Storage Manager for VMWare, IBM Tivoli Archive
Manager
Answer: A

certification IBM   000-037   000-037   certification 000-037   certification 000-037   certification 000-037

NO.23 What are two IBM supported information sources for installing an IBM Tivoli Storage Manager (TSM)
server? (Choose two.)
A. IBM Tivoli Wiki
B. Business Partner Knowledge Base
C. Common TSM List Server - adsm.org
D. IBM Tivoli Storage Manager Installation Guide
E. IBM Redbook for IBM Tivoli Storage Manager Technical Guide
Answer: AD

IBM   certification 000-037   000-037 examen   certification 000-037   000-037

NO.24 The Service Level Agreement was recently enhanced to allow faster restore for critical systems. There
is also a new LTO5 tape drive to be installed and a new disk subsystem already installed and to be used
for the IBM Tivoli Storage Manager V6.2 environment. Which two solutions will achieve the fastest restore
for these critical systems? (Choose two.)
A. define an active data pool on tape
B. define a copy pool on file device class
C. define a copy pool with data deduplication
D. define an active data pool on tape with data deduplication
E. define an active data pool on disk for the critical client systems
Answer: AE

IBM   000-037 examen   certification 000-037   certification 000-037

NO.25 Which step is required prior to the installation process of a new IBM Tivoli Storage Manager (TSM)
server on AIX?
A. Confirm a web browser is set up properly and Java is enabled.
B. Ensure the tape library and drives are installed and configured completely.
C. Verify the operating system is supported and all necessary maintenance is included.
D. Ensure the network interface is available and configured with a minimum speed of 1 Gbit.
Answer: C

IBM   000-037   000-037   certification 000-037

NO.26 According to a company's Service Level Agreement, three versions of a file must be retained after the
file is removed from the client system. Which parameter should be used when defining the backup copy
group?
A. RETVER=3
B. RETEXTRA=3
C. VEREXISTS=3
D. VERDELETE=3
Answer: D

IBM   000-037 examen   000-037 examen

NO.27 Which three database benefits apply to the IBM DB2 database included in IBM Tivoli Storage
Manager V6.2? (Choose three.)
A. larger database capacity
B. automatic database audits
C. automatic database mirroring
D. automatic database reorganization
E. automatic definition for dbbackup trigger
F. eliminates the need for database incremental backups
Answer: ABD

IBM examen   000-037 examen   000-037   000-037

NO.28 Which function of FastBack could assist in the event of a client disk failure?
A. FastBack Image Store
B. Disk Regenerator Utility
C. Bare Machine Recovery
D. FastBack Recovery Manager
Answer: C

IBM   certification 000-037   000-037   000-037   000-037

NO.29 In a newly installed Windows 2008 Server system, a production IBM Tivoli Storage Manager V6.2 (TSM)
server must be installed and set up. What are the first two steps in the installation process? (Choose two.)
A. Check the IBM website for supported platforms.
B. Check the TSM documentation and ReadMe files.
C. Check the IBM website for end of support information.
D. Check the operating system level and installed patches.
E. Call IBM Support to ask for open issues and known problems.
Answer: AB

IBM examen   000-037   000-037   000-037   000-037

NO.30 With four servers to back up, how many IBM Tivoli Storage Manager (TSM) nodes are registered on
the TSM server?
A. 2 nodes
B. 3 nodes
C. 4 nodes
D. 6 nodes
Answer: C

certification IBM   000-037   000-037   000-037

Passer le test IBM 000-037, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification IBM 000-037. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification IBM 000-037.

IBM meilleur examen 000-919, questions et réponses

Si vous vous inscriez le test IBM 000-919, vous devez choisir une bonne Q&A. Le test IBM 000-919 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Un bon choix de l'outil à se former est le point essentiel à passer le test IBM 000-919, et les documentations à propos de rechercher le test IBM 000-919 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Pass4Test peut vous fournir un raccourci à passer le test IBM 000-919: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test IBM 000-919. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Il demande les connaissances professionnelles pour passer le test IBM 000-919. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat IBM 000-919, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Code d'Examen: 000-919

Nom d'Examen: IBM (Informix 11.70 System Administrator)

Questions et réponses: 118 Q&As

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test IBM 000-919 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test IBM 000-919 réel est lancée. C'est possible à réussir 100% avec le produit de IBM 000-919. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

000-919 Démo gratuit à télécharger: http://www.pass4test.fr/000-919.html

NO.1 How is the DBSSO group determined on a Unix system with role separation?
A. It is always the groupinformix.
B. It is set using theonsecurity command line tool.
C. It is the group that owns $INFORMIXDIR/dbssodir.
D. It is the group specified in the DBSSOonconfig parameter.
Answer: C

IBM   000-919   000-919 examen   000-919   certification 000-919

NO.2 Which two corrective actions may be taken if following message is logged in the online message log
during a failed attempt to bring an instance online? (Choose two)
18:15:44
Size of resident + virtual segments 100000KB + 60000KB > 150000KB
18:15:44
total allowed by configuration parameter SHMTOTAL
A.
Decrease SHMADD
B.
Increase SHMTOTAL
C.
Decrease SHMBASE
D.
Increase SHMVIRTSIZE
E.
Decrease buffer pool size
Answer: B,E

IBM examen   000-919 examen   certification 000-919   000-919

NO.3 Which SQL Administration API command will merge non-contiguous table extents?
A. shrink
B. defragment
C. table repack
D. merge extents
Answer: B

IBM examen   000-919 examen   certification 000-919

NO.4 Why do automatic checkpoints cause the database server to trigger more frequent checkpoints?
A. To avoid LRU flushes.
B. To ensure the buffer pool is always available.
C. To ensure theonstat -g ckp report is accurate.
D. To avoid transaction blocking during checkpoints.
Answer: D

IBM   000-919   certification 000-919   certification 000-919

NO.5 Which role can create, alter, or delete trusted context objects?
A. DBA
B. DBSA
C. DBSSO
D. DBSECADM
Answer: D

IBM   certification 000-919   000-919 examen   000-919   000-919

NO.6 Which statement about mapped user functionality is true?
A. Mapped users cannot execute distributed operations.
B. Mapped users are allowed to run with multiple names.
C. The DBSA can control the access to tables at a row level using security labels.
D. The DBSA can grant database server access to externally authenticated users with no local account.
Answer: D

certification IBM   000-919   000-919 examen   000-919

NO.7 For a given procedure name, what is the objective of the SQL query shown below?
A. The query returns the ordered text form of the specified procedure body.
B. The query returns the ordered compiled form of the specified procedure body.
C. The query returns both ordered text and ordered compiled form of the specified procedure body.
D. The query returns neither the ordered text nor the ordered compiled form of the specified procedure
body.
Answer: A

IBM   000-919   000-919

NO.8 Which onstat command will allow the gathering of statistics about the Informix Database Scheduler
tasks that are currently running or scheduled to be run?
A. onstat -g dbc
B. onstat -g sch
C. onstat -g adm
D. onstat -g tsk
Answer: A

IBM   000-919   certification 000-919   000-919   000-919

NO.9 What does the ovbuff field of an onstat -p output show?
A. The number of times that a buffer was read.
B. The number of times a buffer was extended.
C. The number of times that any buffer was overwritten.
D. The number of times the instance ran out offree buffers.
Answer: D

IBM examen   000-919 examen   000-919 examen   certification 000-919   000-919

NO.10 Which statement about the scope of UPDATE STATISTICS is true?
A. If the FOR PROCEDURE keywords are included but the name of any SPL routine is not specified, an
error will be returned.
B. If the FOR TABLE keywords are used without specifying the name or synonym of a table, the database
will not recalculate distributions for any table in the current database.
C. If the FOR TABLE keywords are specified with a table but without specifying a list of columns, the
database server will not recalculate distributions on all of the columns of the specified table.
D. If the FOR PROCEDURE specification, Table and Column Scope, and Resolution clauses are NOT
included, then the statistics are updated for every table and SPL routine in the current database.
Answer: D

certification IBM   000-919   000-919   000-919   certification 000-919

NO.11 Which of the following privileges is NOT valid for a table fragment?
A. ALL
B. INSERT
C. UPDATE
D. CREATE INDEX
Answer: D

IBM   000-919 examen   000-919   000-919   000-919

NO.12 When a SELECT statement is executed which statement is true?
A. The number and duration of the locks is dependent on the ISOLATION LEVEL.
B. If COMMITTED READ isolation is in place then the SELECT will never encounter any locking errors.
C. Within a transaction the database server will place row or page locks on anonlogging table.
D. If the SELECT is part of an UPDATE cursor then the database server will place an exclusive lock on
the entire dataset.
Answer: A

IBM   certification 000-919   certification 000-919   000-919

NO.13 Which sysmaster table can be queried to find the logging status of a database?
A. sysdb
B. sysdblog
C. sysdatabases
D. sysdblogstatus
Answer: C

IBM   000-919 examen   000-919   000-919 examen

NO.14 Which command line utility displays real time statistics about the instance?
A. dbinfo
B. onstat
C. dbschema
D. onmachinfo
Answer: B

IBM examen   000-919 examen   000-919 examen   certification 000-919

NO.15 Which statement about auditing is NOT true?
A. You can enable auditing row updates for all rows in the table.
B. You can enable auditing row updates just for a subset of rows in the table.
C. You can enable auditing row updates for all rows from all tables in the database except for system
catalog tables.
D. You can enable auditing row updates for all rows from all tables in the database and for the system
catalog tables.
Answer: B

IBM   certification 000-919   000-919 examen   certification 000-919

NO.16 What output is NOT reported by the dbschema utility?
A. The database logging mode.
B. The schemas of remote databases.
C. The table definitions without owner names.
D. Theonspaces commands to re-create your systems' dbspaces.
Answer: A

IBM   certification 000-919   000-919   certification 000-919

NO.17 Which statement regarding default roles is true?
A. An administrator can define a default role to assign only to the PUBLIC group for a particular database.
B. The privileges associated with a default role takes precedence over the privileges granted to an
individual user.
C. An administrator can define a default role to assign to individual users or to the PUBLIC group for a
particular database.
D. When a user connects to a database, it is necessary to use the SET ROLE DEFAULT statement in
order to gain the default role privileges.
Answer: C

IBM   certification 000-919   000-919   000-919 examen   000-919

NO.18 To enable network encryption, what two steps must the administrator complete? (Choose two.)
A. Enter the CSM name in thesqlhosts file.
B. Set the IFX_ENCCSMonconfig parameter to 1.
C. Define the CSM in the concsm.cfg configuration file.
D. Enter the CSM name in theonconfig NETTYPE parameter.
E. Set the environment variable ENCCSMCFG to the name of the CSM.
Answer: A,C

IBM   000-919   certification 000-919   000-919   000-919

NO.19 By default, the alarm program gets executed for which event(s)?
A. All events.
B. Only for events with Severity code 1.
C. Only for events with Severity code 5.
D. Only for events with Severity code greater than 1.
Answer: D

certification IBM   000-919 examen   000-919

NO.20 Which of the following activities does the Secure-Auditing Facility NOT monitor and record?
A. Specific rows.
B. Specific users.
C. Specific tables.
D. Specific DML operations.
Answer: A

IBM   000-919   certification 000-919   000-919 examen   000-919

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de IBM 000-919 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

IBM 000-055 examen pratique questions et réponses

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification IBM 000-055.

Est-que vous s'inquiétez encore à passer le test Certification 000-055 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de IBM 000-055? Si vous voulez réussir le test IBM 000-055 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Le test IBM 000-055 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

Code d'Examen: 000-055

Nom d'Examen: IBM (Rational Automation Framework for WebSphere)

Questions et réponses: 60 Q&As

Le test IBM 000-055 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test IBM 000-055. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test IBM 000-055 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Pour vous laisser savoir mieux que la Q&A IBM 000-055 produit par Pass4Test est persuadante, le démo de Q&A IBM 000-055 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test IBM 000-055 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

000-055 Démo gratuit à télécharger: http://www.pass4test.fr/000-055.html

NO.1 Which rafw command option lists all available actions for a given scope.?
A. rafw -t
B. rafw -h
C. rafw -d
D. rafw -l
Answer: D

certification IBM   000-055   000-055   000-055

NO.2 Which rafw command option is used to get inline help for a given action?
A. rafw -t
B. rafw -h
C. rafw -d
D. rafw -l
Answer: C

IBM   000-055 examen   certification 000-055   000-055

NO.3 Which two options for the integrateToBF command add actions to Build Forge as libraries? (Choose
two.)
A. createAll
B. createUITab
C. createLibraries
D. createIntegrationArtifacts
Answer: A,C

IBM   000-055   000-055 examen   certification 000-055

NO.4 Which property in the configure.properties file sets the location of the media directory on target
systems running Linux?
A. OS_RAFW_HOME
B. LINUX_RAFW_HOME
C. LINUX_MEDIA_ROOT
D. RAFW_MEDIA_ROOT
Answer: C

IBM   000-055 examen   certification 000-055

NO.5 Which three artifacts can be created using the RAFW_EnvironmentGenerationWizard project in the
Environment wizard? (Choose three.)
A. the RAFW collector
B. the actual cell in WebSphere
C. the <env>-<cell> project in Build Forge
D. the <env>-<cell> environment in Build Forge
E. the cell definition in RAFW_HOME/user/environments
Answer: C,D,E

certification IBM   certification 000-055   000-055 examen

NO.6 Which three objects must be installed on the framework server? (Choose three.)
A. WebSphere Application Server Base
B. Build Forge Agent
C. RAFW
D. Build Forge Management Console
E. WebSphere Portal Deployment Manager
Answer: B,C,D

certification IBM   000-055   000-055 examen   000-055 examen

NO.7 Where is the configuration for the Build Forge integration stored?
A. in the build forge database
B. the configure.properties file in RAFW_HOME
C. in the buildforge.conf file in BF_HOME/product
D. in the buildforge.properties file in RAFW_HOME
Answer: D

certification IBM   000-055   000-055   000-055   000-055   certification 000-055

NO.8 How is additional logging and tracing for debug purposes enabled in RAFW?
A. use the RAFW_TRACE environment variable
B. change the source code in RAFW_HOME/product/lib/jython/Logger.py
C. set the .level key to TRACE in the logging.properties file in RAFW_HOME
D. change the .level key in configure.properties file in RAFW_HOME to TRACE
Answer: C

certification IBM   000-055   certification 000-055   000-055

NO.9 What is the purpose of the rafw -t command option?
A. to execute an action on a target computer
B. to list all available actions for a given scope
C. to copy configuration data files from one scope to another in the environment tree
D. to import configuration data from an existing cell to its cell definition in the environment tree
Answer: A

IBM   000-055 examen   certification 000-055

NO.10 Which two commands can be used to add actions to Build Forge as libraries? (Choose two.)
A. rafw
B. rafwEnvBuild
C. integrateToBF
D. manageBFLibs
Answer: C,D

IBM   000-055   certification 000-055   000-055 examen   000-055

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.

Pass4Test offre de Adobe 9A0-136 matériaux d'essai

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Adobe 9A0-136, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Beaucoup de gens trouvent difficile à passer le test Adobe 9A0-136, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Adobe 9A0-136 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

Le Certificat de Adobe 9A0-136 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Adobe 9A0-136, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 9A0-136 sans aucun éffort, en même temps, le test de Adobe 9A0-136 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Adobe 9A0-136 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Adobe 9A0-136, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Code d'Examen: 9A0-136

Nom d'Examen: Adobe (Adobe LiveCycle ES2 Core ACE Exam)

Questions et réponses: 89 Q&As

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Adobe 9A0-136. Pass4Test a une expérience riche pour répondre les demandes des candidats.

9A0-136 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-136.html

NO.1 Which three functional descriptions can be achieved using LiveCycle common services?
(Choose
three.)
A. Generate a PDF from a SWF file
B. Remove password encryption from a PDF
C. Create a PDF portfolio
D. Send a document to a network printer
E. Convert a PDF document to XDP format
F. Write a PDF document to the file system
Answer: B,C,E

Adobe   9A0-136 examen   certification 9A0-136   9A0-136

NO.2 Which statement about a custom component is NOT true?
A. The component.xml file must be at the root of the component
B. The required libraries can be located anywhere in the component
C. The custom component must have a META?INF\Manifest.MF file
D. The custom component must have the .jar extension
Answer: C

Adobe   9A0-136   9A0-136   9A0-136 examen   9A0-136   certification 9A0-136

NO.3 Which statement about resource files when exporting an application to a LiveCycle Archive
(LCA)
is true?
A. All resources must be included in the LCA.
B. The user can only choose to include Adobe file types in the LCA.
C. The user can choose to include any resource files in the LCA.
D. No resource files can be included in the LCA.
Answer: C

Adobe   9A0-136 examen   9A0-136

NO.4 You have modified the source code for an existing custom component currently deployed in
LiveCycle. What should you do to deploy the revised component?
A. Uninstall the existing component and install the new component file via LiveCycle
Administration console
B. Stop the currently deployed component and select Patch Component via Livecycle
Workbench’s Component view
C. Uninstall the currently deployed component and select install via Livecycle Workbench’s
Component view
D. Stop the existing component service and patch the new service via LiveCycle Administration
console
Answer: B

Adobe   9A0-136   9A0-136 examen   9A0-136

NO.5 You have created a process to convert various document types to PDF using the Create PDF
operation of the Generate PDF service. You want to add logic to your process to send an email
message if a file type fails to convert to PDF because it is not supported. Which two approaches
are best suited to handle this requirement? (Choose two.)
A. On the Create PDF operation, create a fault route from the activity and select the
FileFormatNotSupported exception to capture the error
B. Create a new process with an Exception event Start Point and use that event to capture the
error
C. Add the Exception event type to the Create PDF operation
D. Use the log file output from the Create PDF operation to capture the error
E. Add a route that includes the business logic to test for a failed conversion
Answer: A,B

Adobe   9A0-136   9A0-136   9A0-136   certification 9A0-136

NO.6 A process fails while running in a production environment. Which should you verify as a first
step
in determining the problem?
A. Application server log file
B. Database log file
C. Configuration manager log file
D. Application server boot log file
Answer: A

Adobe   9A0-136 examen   9A0-136 examen   9A0-136   certification 9A0-136

NO.7 Which three functional descriptions can be achieved by using LiveCycle Foundation Services
as
steps within a process? (Choose three.)
A. Get information about a list of files located on a public FTP site
B. Execute an LDAP query parameterized with process data
C. Determine the ID of the most recent person to modify a local file
D. Read a repository resource into a process variable
E. Configure a JDBC datasource using credentials specified in process data
F. Combine multiple documents into a single PDF document
Answer: A,B,D

Adobe examen   certification 9A0-136   9A0-136   certification 9A0-136

NO.8 An end-user needs privileges for managing PKI credentials. Which role should you assign?
A. Document Services Administrator
B. Security Administrator
C. Credential Administrator
D. Trust Administrator
Answer: D

Adobe   certification 9A0-136   9A0-136   9A0-136   9A0-136

NO.9 You have created a LiveCycle process that must be invoked from a .NET application written in
C#.
Which LiveCycle endpoint should you use?
A. email
B. EJB
C. SOAP
D. Remoting
Answer: C

Adobe examen   9A0-136   9A0-136   9A0-136 examen   9A0-136

NO.10 Which is a reason to use a gateway task that is created with multiple branches of execution?
A. To visually organize your process map.
B. To choose one path among others, based on a data value.
C. To map different possible designs, choosing one of them when more is known about the
process.
D. To allow execution in parallel.
Answer: D

Adobe   9A0-136   certification 9A0-136   9A0-136

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Adobe 9A0-136, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Adobe 9A0-136 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Adobe 9A0-136 sans aucune doute.

Le plus récent matériel de formation examen Adobe 9A0-146 de certification

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Le Certificat de Adobe 9A0-146 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Adobe 9A0-146, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 9A0-146 sans aucun éffort, en même temps, le test de Adobe 9A0-146 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Adobe 9A0-146 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

L'équipe de Pass4Test rehcerche la Q&A de test certification Adobe 9A0-146 en visant le test Adobe 9A0-146. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Adobe 9A0-146 sans aucune doute.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Adobe 9A0-146 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Code d'Examen: 9A0-146

Nom d'Examen: Adobe (Adobe Dreamweaver CS5 ACE Exam)

Questions et réponses: 87 Q&As

Si vous faites toujours la lutte contre le test Adobe 9A0-146, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Adobe 9A0-146. Si vous avez déjà décidé à s'améliorer via Adobe 9A0-146, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

9A0-146 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-146.html

NO.1 Your company will be hosting your Website on a Web server within your department. You can access
the Web server from within your operating system. Which type of connection should you use to upload
files to the web server?
A. RDS
B. Local/Network
C. FTP
D. WebDAV
Answer: B

Adobe   9A0-146   9A0-146 examen

NO.2 You have a Web page that uses a table-based layout and HTML <font> tags. The page loads slowly in
the browser. What can be done to reduce page load time?
A. Convert HTML formatting to CSS.
B. Convert the page to a .CFM file extension.
C. Remove all <table> tags.
D. Remove unnecessary hyperlinks from the page.
Answer: A

Adobe examen   9A0-146   9A0-146   9A0-146 examen   certification 9A0-146

NO.3 Which two technologies does AJAX combine.? (Choose two.)
A. ASP
B. Java
C. JavaScript
D. XML
E. XHTML
Answer: C,D

Adobe   9A0-146   9A0-146   9A0-146 examen

NO.4 Which panel or dialog box ensures that you will be prompted to add accessibility information as you
build your Web pages within Dreamweaver?
A. Dreamweaver Preferences
B. The Site Reports panel
C. The Tag Inspector panel
D. The Behaviors panel
Answer: A

Adobe examen   9A0-146   9A0-146   9A0-146 examen   9A0-146

NO.5 Which action does NOT mitigate page weight?
A. Consolidating multiple CSS stylesheets into one.
B. Using nested tables instead of <div> elements.
C. Avoiding frame-based layouts.
D. Deleting excess whitespace from the code.
Answer: B

Adobe examen   9A0-146   9A0-146

NO.6 All of the files in your Website are in a single folder on your local hard drive. What must you do to see
your Website files listed in the Files panel?
A. Define a local site.
B. Create all site files before opening Dreamweaver.
C. Create an images folder.
D. Create a root folder for Dreamweaver.
Answer: A

Adobe examen   9A0-146   certification 9A0-146   certification 9A0-146

NO.7 You want to build a Website that follows the Web Accessibility Standards. What are three things you can
do to improve accessibility on your Web pages? (Choose three.)
A. Add Alt Text to images.
B. Add title information to SWF files.
C. Add labels for form tags.
D. Position content using tables.
E. Remove page titles.
F. Use CSS inline styles.
Answer: A,B,C

Adobe examen   9A0-146   9A0-146   9A0-146   certification 9A0-146

NO.8 Why should you never rename a file outside of Dreamweaver?
A. Dreamweaver will NOT be able to find the file.
B. The file will get corrupted.
C. Images in the file will disappear.
D. You may create broken links in your site.
Answer: D

certification Adobe   9A0-146 examen   9A0-146   9A0-146 examen   9A0-146

NO.9 For which server technology is Remote Development Services (RDS) a component?
A. ASP
B. ColdFusion
C. JSP
D. PHP
Answer: B

Adobe   certification 9A0-146   certification 9A0-146   9A0-146 examen

NO.10 You are using the Files panel. What happens when you drag an HTML file from the site root folder to a
subfolder in the same site?
A. The file is copied to the subfolder.
B. The file is moved to the subfolder.
C. The file is deleted from the site.
D. Nothing. You cannot drag files within the Files panel.
Answer: B

certification Adobe   9A0-146   certification 9A0-146

NO.11 You have inserted a SWF file by using Dreamweaver and uploaded both the Web page and the SWF file
to your server. What must also be uploaded to the server to properly view the SWF file over the Internet?
A. The Scripts folder
B. A Flash skin
C. The Flash player
D. A browser plug-in
Answer: A

Adobe   9A0-146   9A0-146   9A0-146 examen   certification 9A0-146   certification 9A0-146

NO.12 You want to create a new site from an STE file. Which command should you choose?
A. Site > Manage Sites and click Import.
B. Site > New Site.
C. File > Import.
D. File > Open.
Answer: A

Adobe   9A0-146 examen   9A0-146   9A0-146   9A0-146

NO.13 You need to move Web pages into subfolders within your root folder. Where should you go to move
these files into subfolders to ensure that all Website links remain intact after this process?
A. The Insert menu within Dreamweaver
B. The Web server
C. The operating system
D. The Files panel within Dreamweaver
Answer: D

Adobe   9A0-146   9A0-146   certification 9A0-146   9A0-146   9A0-146 examen

NO.14 You upload an FLV file you are using on a Web page to your server. The movie does NOT play when the
page loads in the browser. What must be on the Web server in addition to the FLV file in order for the
movie to play?
A. The Flash player
B. A skin
C. A security certificate
D. A browser plug-in
Answer: B

Adobe examen   certification 9A0-146   9A0-146   9A0-146

NO.15 You want to specify a local site folder in the Site Setup dialog box. What should you do?
A. Select the Site category and click Browse for Folder.
B. Select the Servers category and click Add New Server.
C. Select the Advanced Settings category and then select Local Info.
D. Select the Site category and type the site name.
Answer: A

Adobe   certification 9A0-146   certification 9A0-146   9A0-146

Vous pouvez tout d'abord télécharger le démo Adobe 9A0-146 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Le plus récent matériel de formation examen Adobe 9A0-057 de certification

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

C'est sûr que le Certificat Adobe 9A0-057 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Adobe 9A0-057, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Adobe 9A0-057 peut bien tester la professionnalité de IT.

Code d'Examen: 9A0-057

Nom d'Examen: Adobe (Adobe Illustrator CS3 ACE Exam)

Questions et réponses: 130 Q&As

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Adobe 9A0-057. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Adobe 9A0-057. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

C'est pas facile à passer le test Certification Adobe 9A0-057, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Adobe 9A0-057 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Adobe 9A0-057, vous allez passer le test Adobe 9A0-057 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

9A0-057 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-057.html

NO.1 You want to create an object to be used at several locations on a poster. You draw the object in a
document, save the object as a symbol, and apply the symbol multiple times. You want to change the
color of the original object without affecting the existing symbols applied to the poster. What should you
do?
A. Copy and paste the symbol in the document to break the link with the Symbols panel.
B. Select each object in the poster and click the Break Link to Symbol button in the Symbols panel.
C. Select the applied symbols in the poster and choose Expand to break the link.
D. Select the object and choose Redefine Symbol in the Symbols panel menu to break the link.
Answer: B

Adobe   9A0-057   9A0-057   9A0-057   certification 9A0-057

NO.2 You create a logo and add a patterned background to it. In the Appearance panel, you duplicate the fill
and create a gradient fill on the top of the patterned background. However, you are unable see the pattern
fill below the gradient fill. What should you do?
A. Change the stacking order to place the pattern background in front of the gradient.
B. Select the Reduce to Basic Appearance option in the Appearance panel.
C. Select the gradient fill and apply a blend mode.
D. Change the opacity settings of the pattern.
Answer: C

Adobe examen   9A0-057   9A0-057   9A0-057

NO.3 You want to create a paragraph of justified text and hang the punctuation so that the right and left
sides of the paragraph maintain a clean, aligned appearance. What should you do?
A. Select the type object and choose Type > Optical Margin Alignment.
B. Use the Smart Punctuation command and enable Smart Quotes.
C. Enable Discretionary Ligatures in the OpenType panel.
D. Enable Optical Tracking in the Character panel.
Answer: A

Adobe   9A0-057   9A0-057   9A0-057 examen

NO.4 You open a legacy document, loading the same font that was used during the document creation.
When you compare this document with a hard copy of the original document, you discover that the type in
the new document has reflowed. Why does this happen?
A. The type is converted to outline.
B. The file is saved in the EPS format.
C. The OpenType contextual alternates are enabled.
D. The type engines in Illustrator versions are different.
Answer: D

Adobe   certification 9A0-057   certification 9A0-057   9A0-057

NO.5 You create a grouped set of objects and apply an opacity setting from 10 percent to 50 percent. You
want the set of objects to blend with the background without having an overlapping effect. What should
you do?
A. Apply Isolate Blending.
B. Apply Knockout Group.
C. Apply the Opacity & Mask Define Knockout shape.
D. Increase the opacity of all objects.
Answer: B

Adobe examen   9A0-057 examen   certification 9A0-057   certification 9A0-057

NO.6 You have an Illustrator document that has decorative ornament characters. You want to view all other
ornaments that are available in the fonts that are used in the document. Which panel should you use?
A. Character
B. Control
C. Glyphs
D. Character Styles
Answer: C

Adobe   certification 9A0-057   9A0-057   9A0-057   9A0-057   9A0-057 examen

NO.7 You want to change an object's fill from solid to a gradient. You create the gradient and fill another
object in your document. What should you do to apply the gradient fill to the object?
A. Select the object and use the Eyedropper tool to select the gradient fill.
B. Select the object and use the Paint Brush tool to apply the gradient fill.
C. Select the object and use the Gradient tool to apply the gradient fill.
D. Select the gradient pattern in the Swatches panel.
Answer: A

certification Adobe   certification 9A0-057   9A0-057

NO.8 You create an object by using the Pen tool and apply a 1 point stroke to the object. You want to
change the stroke to a calligraphic brush stroke without redrawing the object. What should you do?
A. Use the Brush tool to change the stroke to a calligraphic brush stroke.
B. Select the stroke and change it by using the Stroke panel.
C. Select the stroke and update the stroke in the Brushes panel.
D. Open the Brushes panel and click the Options of Selected Object button.
Answer: C

certification Adobe   9A0-057   certification 9A0-057   9A0-057

NO.9 You want to edit one line of type that is part of a paragraph in an existing document. Which tool should
you use?
A. Rectangle
B. Eraser
C. Area Type
D. Lasso
Answer: C

Adobe   9A0-057   9A0-057   9A0-057   9A0-057

NO.10 You want to create an object by using a tool that allows you to connect lines and curves. The lines
must be smooth and the anchor points must be placed at all positions where a line or a curve changes
direction. Which tool should you use?
A. Pencil
B. Brush
C. Pen
D. Line
Answer: C

Adobe   9A0-057   9A0-057   9A0-057 examen

NO.11 How does the OpenType font format differ from TrueType and Type 1 fonts?
A. OpenType is a format that can be modified. TrueType and Type 1 fonts CANNOT be modified.
B. OpenType can be used for both desktop printing and Web design. TrueType and Type 1 fonts can only
be used in PostScript printing.
C. OpenType is a cross-platform font format, and TrueType and Type 1 fonts are platform-specific font
formats.
D. OpenType refers to fonts that are outlined. TrueType and Type 1 refer to fonts that are solid.
Answer: C

Adobe   9A0-057 examen   9A0-057   certification 9A0-057

NO.12 You want to apply color to the headline of an advertisement. The gradient fill of the color must
complement the background image that is placed as a link in the document. You create a linear gradient
and apply the gradient to the type, but the type remains black. What should you do?
A. Drag the gradient onto the type with the Gradient tool.
B. Sample the gradient with the Eyedropper tool and apply it to the headline type.
C. Create a character style defining the gradient fill as a Character Color attribute and apply it to the
headline.
D. Use the Create Outlines command to make paths from the headline type and apply the gradient.
Answer: D

certification Adobe   certification 9A0-057   9A0-057 examen

NO.13 You create a new paragraph style from a selected, formatted paragraph and apply it as you type in
more text. You then decide to decrease the type size of the style by 1 point. The change is reflected in all
styled paragraphs except the original paragraph in which the paragraph style was defined. Why does this
happen?
A. The original formatted paragraph was legacy text.
B. The original text was imported from Microsoft Word. The Word formatting was still retained by the text,
overriding the Illustrator paragraph style.
C. Character styles were created after the paragraph style was applied to the other paragraphs.
D. The paragraph style was not applied to the selected text after creating the paragraph style from the
selected paragraph.
Answer: D

Adobe   9A0-057 examen   9A0-057   9A0-057 examen   9A0-057

NO.14 You convert a photograph to a black and white line art image by using the Live Trace command. You
want to add a few colors to the photo. You choose Object > Live Trace > Tracing Options. What should
you do?
A. Change Mode to Color and adjust the Resample resolution.
B. Select Adjusted Image from the Raster drop-down list and select the Output to Swatches check box.
C. Change Mode to Color and increase the value in Max Colors.
D. Specify a value for Minimum Area and select the Output to Swatches check box.
Answer: C

Adobe   9A0-057   certification 9A0-057   certification 9A0-057   certification 9A0-057   certification 9A0-057

NO.15 Click the Exhibit button.
You are creating a sales brochure based on a sample provided by your client. In the sample, the
punctuation appears outside the width of the justified type. What should you do to create the desired
effect without affecting the ability to edit the type?
A. Use the Paragraph panel to apply hanging left and right indents when punctuation appears near the
margins.
B. Set up guides on a grid, setting each line individually and positioning each line to force the punctuation
over the guides.
C. Delete the punctuation that falls near the margins and set the punctuation as separate type elements
outside the margins.
D. Use the Paragraph panel to apply Roman Hanging Punctuation.
Answer: D

certification Adobe   9A0-057   9A0-057   9A0-057

NO.16 You want to distort a rectangle by using the Envelope Distort option from the Object menu. What
should you do?
A. Choose Make with Mesh and select the rows and columns to distort the rectangle.
B. Choose Make with Warp and select the Style and Bend to distort the rectangle.
C. Choose Envelope Options and select the Distort Appearance check box in the Envelope Options
dialog box.
D. Choose Make with Top Object to distort the rectangle.
Answer: B

certification Adobe   9A0-057 examen   9A0-057

NO.17 You are creating a conference schedule and want to specify a description for different seminars. The
same typographic attributes, including typeface, leading, and alignment, must be applied to each seminar
description. How should you apply these attributes?
A. Set one paragraph with the desired attributes and use the Bridge application to batch process the
attributes.
B. Create a paragraph style and apply it to the entire text.
C. Set one paragraph with the desired attributes, save as an EPS and place in the file.
D. Create a character style with the desired attributes and apply it to the entire text.
Answer: B

Adobe   9A0-057 examen   9A0-057   9A0-057

NO.18 What is the advantage of using an Envelope Distort warp on type artwork over applying a warp effect?
A. Envelope Distort allows you to encode the artwork by embedding the font in the Illustrator document.
B. Envelope Distort allows you to modify the shape of the envelope with the Direct Selection tool.
C. Envelope Distort allows you to create outlines and therefore, you are able to apply gradients and other
effects to the type.
D. Envelope Distort allows you to edit the effect after it is applied.
Answer: B

Adobe examen   9A0-057 examen   9A0-057 examen   9A0-057

NO.19 You create an object and now you want to increase its size proportionately by 10 percent. You select
the object. What should you do?
A. Use the Scale tool while holding the OPTION key on a Mac computer or the ALT key on a
Windows-based computer.
B. Use the Free Transform tool.
C. Choose Show Bounding Box, and pull one corner of the object in the direction you wish to scale.
D. Double-click the Scale tool, and choose the Uniform option.
Answer: D

Adobe   9A0-057   9A0-057 examen

NO.20 You are creating a drawing of a series of birds in flight. You draw a bird and you want to duplicate it
and change the angle of its direction. Each bird must rotate at an angle of 15 degrees from the last bird.
What should you do?
A. Select the bird and double-click the Rotate tool. Apply a 15-degree angle and click the Copy button to
copy the original bird.
B. Copy and paste the original bird. Use the Rotate tool to rotate the bird by using your mouse.
C. Use the Shear tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
D. Use the Reflect tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
Answer: A

Adobe   9A0-057 examen   9A0-057 examen   9A0-057

Est-que vous s'inquiétez encore à passer le test Certification 9A0-057 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Adobe 9A0-057? Si vous voulez réussir le test Adobe 9A0-057 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

L'avènement de la certification Adobe pratique d'examen 9A0-088 questions et réponses

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Adobe 9A0-088. Votre argent sera tout rendu si vous échouez le test.

Le test Adobe 9A0-088 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

Code d'Examen: 9A0-088

Nom d'Examen: Adobe (Adobe IIIustrator CS4 Exam)

Questions et réponses: 106 Q&As

Pass4Test est un seul site de provider le guide d'étude Adobe 9A0-088 de qualité. Peut-être que vous voyiez aussi les Q&A Adobe 9A0-088 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Adobe 9A0-088 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

9A0-088 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-088.html

NO.1 You create artwork that is to be restricted to two Pantone spot colors. When printed, you discover that
there are objects using Cyan and Magenta in your document.
How can you find these objects?
A. choose View > Edit Views
B. choose Edit > Find and Replace
C. deselect all objects, then choose Window > Appearance
D. choose Select > All, then choose Edit > Edit Colors > Adjust Color
E. select the Overprint Preview checkbox in the Separations Preview panel, then turn off visibility for the
Pantone colors
Answer: E

Adobe   9A0-088 examen   9A0-088

NO.2 You are working with five open, tabbed documents and need to switch between them quickly.
How should you do this?
A. press F9
B. press Command-` (Mac OS) or Ctrl-F6 (Windows)
C. press Command-Tab (Mac OS) or Ctrl-Tab (Windows)
D. press Command-Shift-W (Mac OS) or Control-Shift-W (Windows)
Answer: B

certification Adobe   certification 9A0-088   9A0-088   certification 9A0-088   9A0-088 examen

NO.3 You are working with four open, tabbed documents. You want to view all of them at the same time,
with one document in each corner of your monitor.
Where do you find the feature that lets you lay out the windows as a grid?
A. the View menu
B. the Control panel
C. the Window menu
D. the Application Bar
Answer: D

Adobe   9A0-088   9A0-088   certification 9A0-088

NO.4 You want to create a straight path and then add an arc to one end of the path.
What do you do to accomplish this?
A. click with the Pen tool, then Shift-click to add the second point; choose Effect > Warp > Arc
B. using the Pencil tool, hold down the Shift key and click-drag to create a straight path; release the Shift
key and continue to draw to create an arc
C. click with the Pen tool then click again to place the end of the straight path; finally, click and drag to
create a third anchor point with Bezier handles
D. use the Line tool to draw a straight path; select the Arc Tool and Option-drag (MacOS) or Alt-drag
(Windows) on the end of the straight path to create the arc
Answer: C

certification Adobe   9A0-088   9A0-088   certification 9A0-088   9A0-088 examen

NO.5 Your rulers are set to centimeters. You want to add a horizontal guide to the document, at exactly 10
cm.
What should you do?
A. Shift-click the measurement point in the vertical ruler
B. double-click the measurement point in the vertical ruler
C. hold down Shift as you drag the guide from the ruler area onto the artboard
D. hold down Option (Mac OS) or Alt (Windows) as you drag the guide from the ruler area onto the
artboard
Answer: C

Adobe   certification 9A0-088   9A0-088   certification 9A0-088   9A0-088   9A0-088

NO.6 You are creating a JPG banner ad for display on a web site. You want to proof your vector artwork.
What should you choose?
A. View > Outline
B. View > Pixel Preview
C. View > Overprint Preview
D. View > Proof Setup > Customize
Answer: B

Adobe   certification 9A0-088   9A0-088   9A0-088 examen

NO.7 You must add an additional Artboard that is 11" x 17" in your document. To accomplish this, you select
the Artboard tool from the Tools panel.
What should you do next?
A. press Command-N (Mac OS) or Ctrl-N (Windows), choose Tabloid from the Size pop-up menu, and
click OK
B. double-click in an empty part of the artboard, then choose Tabloid from the Presets pop-up menu in the
Control panel
C. drag a rectangle in the document window, and then select Tabloid from the Presets pop-up menu in the
Control panel
D. click the New Artboard button in the Control panel, and then select Tabloid from the Presets pop-up
menu in the Control panel
Answer: C

Adobe   9A0-088 examen   9A0-088

NO.8 You want to create a new document in which you will lay out three same-sized 1/3-page newspaper
ads.
After choosing File > New, which settings should you choose from the New Document dialog box?
A. choose Print from the New Document Profile list; enter 3 in the Number of Artboards field; specify the
size, spacing, and bleed values in the fields provided and click OK
B. choose Basic RGB from the New Document Profile list; enter 3 in the Number of Artboards field;
specify the size, spacing, and bleed values in the fields provided and click OK
C. choose Basic CMYK from the New Document Profile list; enter 3 in the Number of Artboards field;
specify the size, spacing, and bleed values in the fields provided and click the Templates button
D. choose Web from the New Document Profile pop-up menu; enter 3 in the Number of Artboards field;
specify the size, spacing in the fields provided, then click the Advanced button, then the Templates button
Answer: A

certification Adobe   certification 9A0-088   certification 9A0-088

NO.9 While working on a document to be printed on an offset press you decide to print a composite proof to
examine the results of color trapping manually done in the document.
To accomplish this, you should choose which Overprint setting on the Advanced pane of the Print dialog?
A. Discard
B. Simulate
C. Preserve
D. Print as Bitmap
Answer: B

Adobe   9A0-088   certification 9A0-088

NO.10 You want to create an action that includes, among other steps, the making of a gradient mesh.
At the point in the recording that you want to include the gradient mesh, what should you do?
A. keep recording as you create the gradient mesh
B. pause the recording, create the mesh, then resume
C. pause the recording, create the mesh, choose Insert Object in the Action panel menu, then resume
D. pause the recording, create the mesh, choose Insert Selected Path in the Action panel menu, then
resume
Answer: D

Adobe examen   9A0-088   9A0-088   9A0-088   9A0-088

NO.11 Click the Exhibit button.
Using the artworks on the left, you want to create a pattern that seamlessly repeats, like the graphic on
the right.
What should you do?
A. select the artwork with the Selection tool and drag it into the Swatches panel
B. select and group the artwork, then click the New Swatch button at the bottom of the Swatches panel
C. create a square behind the artwork with no fill or stroke; select and drag the square and the artwork to
the Swatches panel
D. create a square over the artwork with no fill or stroke; select both the square and the artwork and
choose Edit > Define Pattern
Answer: C

Adobe   9A0-088 examen   9A0-088   9A0-088 examen

NO.12 You create a pattern swatch and apply it to several objects. You want to make a change in the pattern.
What should you do so that the pattern in all the objects updates?
A. double-click the pattern swatch and make the change in the Swatch Options dialog box
B. drag the pattern swatch to the artboard, make your edit, select it again, choose Edit > Define Pattern,
and give it the same Swatch Name
C. drag the pattern swatch to the artboard, make your edit, select it again, and hold down the Shift key
while you drag it over the original in the Swatches panel
D. drag the pattern swatch to the artboard, make your edit, select it again, and hold down the Option (Mac
OS) or Alt (Windows) key while you drag it over the original
Answer: D

Adobe examen   9A0-088 examen   9A0-088   9A0-088   9A0-088

NO.13 You are saving a document as a PDF file. Your printer has instructed you to leave the transparency
effects unflattened.
Which PDF standard should you choose?
A. PDF/X-1a:2001
B. PDF/X-3:2002
C. PDF/X-3:2003
D. PDF/X-4:2008
Answer: D

certification Adobe   9A0-088 examen   9A0-088

NO.14 You want to add a set of keywords to a document's metadata.
What should you choose?
A. File > File Info
B. Window > Variables
C. Window > Document Info
D. File > Document Setup
Answer: A

Adobe examen   certification 9A0-088   9A0-088 examen   9A0-088 examen

NO.15 Using the Layers panel, you want to copy the currently selected objects from one sublayer to another.
What should you do?
A. drag the Selected Art icon in the Layers panel to the target sublayer
B. Shift-drag the Selected Art icon in the Layers panel to the target sublayer
C. Option-drag (Mac OS) or Alt-drag (Windows) the Selected Art icon in the Layers panel to the target
sublayer
D. Command-drag (Mac OS) or Ctrl-drag (Windows) the Selected Art icon in the Layers panel to the
target sublayer
Answer: C

certification Adobe   certification 9A0-088   9A0-088 examen

NO.16 How can you find a list of all current keyboard shortcuts?
A. choose Edit > Keyboard Shortcuts, then click the Save button
B. choose Edit > Keyboard Shortcuts, then click the Export Text button
C. choose the Help menu, then type Keyboard Shortcuts in the Search field
D. open the Illustrator Defaults.kys file inside the Illustrator application folder in a text editor
Answer: B

Adobe   certification 9A0-088   9A0-088   9A0-088

NO.17 While working with overlapping filled paths you experience difficulty selecting some of the lower paths.
All of the following options are disabled by default in Illustrator's Preferences dialog box.
Which of them, once enabled, should make it easier to select individual, overlapping objects?
A. Use Preview Bounds
B. Disable Auto Add/Delete
C. Object Selection by Path Only
D. Type Object Selection by Path Only
Answer: C

Adobe examen   9A0-088   certification 9A0-088   certification 9A0-088   certification 9A0-088

NO.18 To make it easier to print documents to the same device in the future you have decided to create a
reusable print preset.
What should you do?
A. choose File > Print, set all options, then select Custom from the Print Preset popup menu
B. choose File > Print, set all options, click the disk icon in the upper right corner of the dialog box
C. choose File > Print, set all options, then Option-click (Mac OS) or Alt-click (Windows) the Print button
D. choose File > Print, set all options, click the Page Setup button in the lower left corner of the dialog box
Answer: B

Adobe   certification 9A0-088   certification 9A0-088

NO.19 For a series of related projects you decide that you want to create a reusable Illustrator file that
includes the number of artboards as well as all the custom object, paragraph and character styles, color
swatches, symbols, and brushes you have already created.
How would you save your current document in this format?
A. choose File > Save a Copy and select FXG from the Format pop-up menu
B. choose File > Export and select Enhanced Metafile from the Format pop-up menu
C. choose File > Save as Template and leave the Format pop-up menu at its default setting
D. You choose File > Save As; in the Save As dialog box, browse to the New Document Profiles folder on
your hard drive and click the Save button
Answer: C

Adobe   certification 9A0-088   9A0-088 examen   9A0-088   9A0-088

NO.20 You are drawing with the Pen tool.
What happens when you hold down the Option (Mac OS) or Alt (Windows) key while the mouse button is
pressed?
A. Paths are constrained to 45- or 90-degree angles.
B. You are able to draw a path freehand, as with the Pencil tool.
C. You are able to move the anchor point while it is being created.
D. You are able to drag out non-symmetrical Bezier handles from the anchor point.
Answer: D

Adobe   certification 9A0-088   9A0-088   9A0-088

NO.21 Which file format does Illustrator use when you choose File > Save for Microsoft Office?
A. TIF
B. EPS
C. PNG
D. WMF
Answer: C

Adobe   9A0-088   9A0-088 examen   9A0-088   certification 9A0-088   9A0-088

NO.22 You are preparing a PDF file for your printer. You want to include trim marks and a bleed value of 0.25
inches.
What should you do to prevent printer marks from being visible in the bleed area?
A. set the four bleed settings to a value above 0.25 inch
B. enter a value of 0.25 inch for the four bleed settings and the Offset setting
C. set the four bleed settings to 0.25 inch, then deselect the Trim Marks checkbox
D. select the Use Document Bleed Settings checkbox and deselect the Color Bars checkbox
Answer: B

Adobe   9A0-088   certification 9A0-088   certification 9A0-088   9A0-088

NO.23 You want to a duplicate an artboard and its artwork.
What should you do?
A. drag a marquee around the artboard with the Selection tool, choose Object > Transform > Move, then
click the Copy button
B. with the Artboard tool, select the Move/Copy Artwork with Artboard option in the Control panel, and
then Option-drag (Mac OS) or Alt-drag (Windows) the artboard
C. with the Artboard tool, select the artboard you wish to duplicate, and then Option-click (Mac OS) or
Alt-click (Windows) on the New Artboard button in the Control panel
D. choose File > Document Setup, click the Edit Artboards button, then Command-Shift-click (Mac OS) or
Ctrl-Shift-click (Windows) on the New Artboard button in the Control panel
Answer: B

certification Adobe   9A0-088   9A0-088   9A0-088 examen   9A0-088 examen

NO.24 You find that screen redraw is slow and stuttering while navigating around a complex drawing with the
Hand tool.
In Illustrator, what do you do to control the quality and speed of updates while navigating with the Hand
tool?
A. double-click the Hand tool
B. choose View > Proof Setup > Customize
C. select the User Interface pane of the Preferences dialog box
D. select the Units & Display Performance pane of the Preferences dialog box
Answer: D

certification Adobe   9A0-088   certification 9A0-088

NO.25 You have opened panels, closed panels, and moved them around the screen. You want to return all
the panels to the default state, as they appeared when Illustrator was first installed.
What should you do?"
A. quit Illustrator without saving and relaunch
B. select Window > Workspace > Essentials
C. select Window > Arrange > Consolidate All Windows
D. select Window > Workspace > Manage Workspaces
Answer: B

Adobe examen   9A0-088   9A0-088 examen   9A0-088   9A0-088

NO.26 Which option must be turned on before you can turn off visibility of individual color plates in the
Separation Preview panel?
A. Proof Colors
B. Pixel Preview
C. Isolation Mode
D. Overprint Preview
Answer: D

Adobe examen   9A0-088 examen   certification 9A0-088   9A0-088   9A0-088 examen   9A0-088 examen

NO.27 You have a complicated multi-layer Illustrator document that you want to open in Photoshop
maintaining the maximum amount of editability.
What should you do?
A. launch Photoshop, Choose File > Open and select your Illustrator file
B. select Export from the File menu, select Enhanced Metafile (emf) from the Format pop-up menu, and
click Export
C. select Export from the File menu, select Photoshop (psd) from the Format pop-up menu, and click
Export; select the Flat Image radio button and click OK
D. select Export from the File menu, select Photoshop (psd) from the Format pop-up menu, and click
Export; select the Write Layers radio button, and click OK
Answer: D

Adobe examen   9A0-088 examen   9A0-088   9A0-088   9A0-088

NO.28 Without using the Selection tool, you want to select all of the objects contained within a specific layer.
What should you do?
A. Shift-click the layer name in the Layers panel
B. double-click the layer name in the Layers panel
C. click the circular target icon to the right of the layer name in the Layers panel
D. while the layer is selected in the Layers panel, press Command-Option-A (Mac OS) or Ctrl-Alt-A
(Windows)
Answer: C

certification Adobe   9A0-088   certification 9A0-088

NO.29 You want to save the current document setup as a document profile that you can use to create future
documents.
What should you do?
A. choose File > New. You enter a name for the profile in the Name field and then click OK
B. make sure Document is selected in the Document Info panel flyout menu, and then choose Save from
the panel menu; in the Save Selection Info As dialog box, enter a name for the profile in the Save As field
and click Save
C. choose File > Save As; in the Save As dialog box, enter a name for the profile in the Save As field;
choose Adobe Illustrator (ai) from the Format menu; browse to the New Document Profiles folder on your
system and click Save
D. choose File > Save As Template; in the Save As dialog box, you enter a name for the profile in the
Save As field; choose Illustrator Template (ait) from the Format menu; browse to the Templates folder on
your system and click Save
Answer: C

certification Adobe   9A0-088   certification 9A0-088   certification 9A0-088

NO.30 You are saving a PDF file and you want to protect it with a password.
In the Save Adobe PDF dialog box, what determines whether or not you can use High (128-bit RC4)
encryption?
A. Color Conversion pop-up menu
B. Acrobat Compatibility pop-up menu
C. Compress Text and Line Art checkbox
D. Optimize for Fast Web View checkbox
Answer: B

Adobe   9A0-088   9A0-088   9A0-088   9A0-088   9A0-088 examen

On peut voir que beaucoup de candidats ratent le test Adobe 9A0-088 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Adobe 9A0-088 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Adobe 9A0-088, Pass4Test peut offrir les Q&As des autres test Certification IT.