Microsoft 070-412 examen pratique questions et réponses

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Microsoft 070-412, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Microsoft 070-412 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Microsoft 070-412 sans aucune doute.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Microsoft 070-412. Cet outil de formation est convenable pour les candidats de test Microsoft 070-412. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

Code d'Examen: 070-412
Nom d'Examen: Microsoft (Configuring Advanced Windows Server 2012 Services)
Questions et réponses: 254 Q&As

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Microsoft 070-412.

Avec l'aide du Pass4Test, vous allez passer le test de Certification Microsoft 070-412 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Microsoft 070-412, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

070-412 Démo gratuit à télécharger: http://www.pass4test.fr/070-412.html

NO.1 Note: This question is part of a series of questions that use the same or similar answer choices.
An
answer choice may be correct for more than one question in the series. Each question is
independent of
the other questions in this series. Information and details provided in a question apply only to that
question. Your network contains an Active Directory domain named contoso.com. The domain
contains
two member servers named Server1 and Server2. All servers run Windows Server 2012. Server1
and
Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a
failover
cluster named Cluster1. You add two additional nodes in Cluster1. You have a folder named Folder1
on
Server1 that hosts application data. Folder1 is a folder target in a Distributed File System (DFS)
namespace. You need to provide highly available access to Folder1. The solution must support DFS
Replication to Folder1. What should you configure?
A. the cluster quorum settings
B. Affinity
Single
C. live migration
D. the preferred owner
E. quick migration
F. the Scale-Out File Server
G. Affinity
None
H. the possible owner
I. the Handling priority
J. the host priority
K. a file server for general use
L. the failover settings
Answer: K

certification Microsoft   070-412   certification 070-412

NO.2 Your network contains an Active Directory domain named contoso.com. The domain contains
two
servers named Server1 and Server2 that run Windows Server 2012. Server1 has the DHCP Server
server role installed. Server2 has the Hyper-V server role installed. Server2 has an IP address of
192.168.10.50. Server1 has a scope named Scope1 for the 192.168.10.0/24 network. You plan to
deploy
20 virtual machines on Server2 that will be connected to the external network. The MAC addresses
for the
virtual machines will begin with 00-15-5D-83-03. You need to configure Server1 to offer the virtual
machines IP addresses from 192.168.10.200 to 192.168.10.219. Physical computers on the network
must
be offered IP addresses outside this range. You want to achieve this goal by using the minimum
amount
of administrative effort. What should you do from the DHCP console?
A. Delete Scope1 and create two new scopes.
B. Configure Allow filters and Deny filters.
C. Create a policy.
D. Create reservations.
Answer: C

certification Microsoft   070-412   070-412 examen   certification 070-412   070-412

NO.3 Note: This question is part of a series of questions that use the same or similar answer choices.
An
answer choice may be correct for more than one question in the series. Each question is
independent of
the other questions in this series. Information and details provided in a question apply only to that
question. Your network contains an Active Directory domain named contoso.com. The domain
contains
two member servers named Server1 and Server2. All servers run Windows Server 2012. Server1
and
Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a
failover
cluster named Cluster1. You add two additional nodes to Cluster1. You need to ensure that Cluster1
stops
running if three nodes fail. What should you configure?
A. the possible owner
B. a file server for general use
C. live migration
D. the Handling priority
E. the preferred owner
F. the cluster quorum settings
G. the host priority
H. the Scale-Out File Server
I. the failover settings
J. Affinity
Single
K. Affinity
None
L. quick migration
Answer: F

Microsoft   070-412   070-412   070-412

NO.4 You have a datacenter that contains six servers. Each server has the Hyper-V server role
installed and
runs Windows Server 2012. The servers are configured as shown in the following table.
Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1.
You
need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To
which
server and by which method should you move VM1?
A. to Host6 by using a storage migration
B. to Host2 by using a live migration
C. to Host3 by using a storage migration
D. to Host1 by using a quick migration
Answer: C

Microsoft   070-412   070-412   070-412   certification 070-412

NO.5 Your network contains an Active Directory domain named contoso.com. A previous
administrator
implemented a Proof of Concept installation of Active Directory Rights Management Services (AD
RMS).
After the proof of concept was complete, the Active Directory Rights Management Services server
role
was removed. You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an
error
message indicating that an existing AD RMS Service Connection Point (SCP) was found. You need to
remove the existing AD RMS SCP . Which tool should you use?
A. ADSI Edit
B. Active Directory Users and Computers
C. Active Directory Domains and Trusts
D. Active Directory Sites and Services
E. Services
F. Authorization Manager
G. TPM Management
H. Certification Authority
Answer: AD

Microsoft   070-412   070-412

Vous avez aussi la possibilité à réussir le test Microsoft 070-412. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.