Le test Alcatel-Lucent 4A0-101 est l'un très improtant dans tous les tests de Certification Alcatel-Lucent, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Alcatel-Lucent 4A0-101 dans Pass4Test pour se former avant le test Alcatel-Lucent 4A0-101.
Choisissez le Pass4Test, choisissez le succès de test Alcatel-Lucent 4A0-101. Bonne chance à vous.
Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Alcatel-Lucent 4A0-101 via son guide d'étude. Est-ce que vous vous souciez de test Certification Alcatel-Lucent 4A0-101? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.
Code d'Examen: 4A0-101
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Interior Routing Protocols and High Availability)
Questions et réponses: 177 Q&As
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
Dépenser assez de temps et d'argent pour réussir le test Alcatel-Lucent 4A0-101 ne peut pas vous assurer à passer le test Alcatel-Lucent 4A0-101 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Alcatel-Lucent 4A0-101. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Alcatel-Lucent 4A0-101. Choisir le produit de Pass4Test particulier pour le test Certification Alcatel-Lucent 4A0-101 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
4A0-101 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-101.html
NO.1 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2
goes down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of
Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send
updates to their adjacent routers. Once the process is complete for all routers, the networks have
converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At
this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information.
At this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link
is down. At this point, both routers R1 and R2 re-compute their link state database and sendupdates
to their adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent examen 4A0-101 certification 4A0-101
NO.2 Static routing will be used in a network between a corporate head office, with many
connected networks, and a branch office, with one connection to the head office. Which of the
following best describes the likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more
specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office
router will have a default route.
Answer: D
Alcatel-Lucent certification 4A0-101 4A0-101 4A0-101 examen
NO.3 When a router receives an IP packet, but does not find a match in the routing table for the
destination IP address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent 4A0-101 examen certification 4A0-101 4A0-101 certification 4A0-101
NO.4 Click the exhibit button.
Routers R1, R2, and R3 are running a classful routing protocol between them. Assuming that router
R1 advertises all directly connected networks, how will these networks be represented in router
R3's routing table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/ 24 and one entry for 10.1.2.0/ 24.
C. The networks will be represented with one entry of 10.0.0.0/ 8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/ 24 in router R3's route table.
Answer: C
Alcatel-Lucent 4A0-101 4A0-101 4A0-101
NO.5 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent 4A0-101 4A0-101
NO.6 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
certification Alcatel-Lucent 4A0-101 examen 4A0-101 4A0-101 4A0-101
NO.7 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent 4A0-101 certification 4A0-101
NO.8 Which of the following statements apply to link state protocol behavior? Choose three
answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C,E
Alcatel-Lucent 4A0-101 certification 4A0-101 4A0-101 certification 4A0-101
NO.9 Click the exhibit button.
A static route is created on router R1, using the "static-route 0.0.0.0/ 0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/ 0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent examen 4A0-101 4A0-101 examen certification 4A0-101
NO.10 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
certification Alcatel-Lucent certification 4A0-101 certification 4A0-101 certification 4A0-101 4A0-101 4A0-101
NO.11 Which of the following commands can be used to display the number of SPF computations
that have been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
certification Alcatel-Lucent 4A0-101 4A0-101
NO.12 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure
router static-route 10.2.3.0/ 24 next-hop 10.1.2.1" command. What is the correct traceroute
command to test this static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
certification Alcatel-Lucent certification 4A0-101 4A0-101 4A0-101 examen
15. What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
certification Alcatel-Lucent 4A0-101 4A0-101 4A0-101 4A0-101 examen
16. Which of the following statements regarding distance vectors protocols are true? (Choose
two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted
beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant
routers and how they interconnect
Answer: A,C
certification Alcatel-Lucent certification 4A0-101 certification 4A0-101
NO.13 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach
the network behind router R2?
A. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2 / 24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/ 24 next-hop 139.120.121.2
Answer: A
Alcatel-Lucent certification 4A0-101 4A0-101 4A0-101 certification 4A0-101 4A0-101
NO.14 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming
that there are no stub networks, which of the following statements regarding type 4 LSA generation
is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA
that is flooded to area 2.
Answer: D
Alcatel-Lucent 4A0-101 examen 4A0-101 certification 4A0-101 4A0-101
Le Certificat de Alcatel-Lucent 4A0-101 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Alcatel-Lucent 4A0-101, c'est-à-dire avoir une grande fortune. Le Certificat Alcatel-Lucent 4A0-101 peut bien tester des connaissances professionnelles IT. La Q&A Alcatel-Lucent 4A0-101 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
没有评论:
发表评论