显示标签为“TB0-120”的博文。显示所有博文
显示标签为“TB0-120”的博文。显示所有博文

2013年8月18日星期日

Le meilleur matériel de formation examen Tibco TB0-120

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Tibco TB0-120 et passer le test à la première fois.


Le programme de formation Tibco TB0-120 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.


Code d'Examen: TB0-120

Nom d'Examen: Tibco (TIBCO Enterprise Message Service™ 6 Certification Exam)

Questions et réponses: 112 Q&As

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Tibco TB0-120 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Tibco TB0-120 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Tibco TB0-120.


Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.


TB0-120 Démo gratuit à télécharger: http://www.pass4test.fr/TB0-120.html


NO.1 Which two statements are true about routing queue messages? (Choose two.)
A. Routed queue messages can travel to adjacent servers without reaching the home queue.
B. Each server in the route path must have its queue defined as global.
C. The concept of zones and hops does not apply to queue messages.
D. Queue messages can travel multiple hops.
Answer: B,C

Tibco examen   TB0-120 examen   TB0-120   TB0-120   certification TB0-120

NO.2 Which two statements are true about synchronous and asynchronous message consumption?
(Choose two.)
A. For synchronous consumption, the message consumer explicitly invokes a receive call on the topic or
queue.
B. The consumer can receive messages synchronously by registering a synchronous message listener to
receive the messages.
C. When asynchronously receiving messages, the consumer remains blocked until a message arrives.
D. For asynchronous consumption, a message listener can be implemented that serves as an
asynchronous event handler for messages.
Answer: B,C

Tibco   TB0-120   certification TB0-120   TB0-120

NO.3 An EMS server and client are receiving heartbeats. Given the following EMS server settings:
-client_timeout_server_connection = 20 seconds -server_timeout_client_connection = 10 seconds
What are two possible outcomes? (Choose two.)
A. If EMS server does not receive heartbeats from a client for a period exceeding 10 seconds, the EMS
server will close the connection.
B. If EMS server does not receive heartbeats from a client for a period exceeding 20 seconds, the EMS
server will close the connection.
C. If a client does not receive heartbeats from EMS server for a period exceeding 10 seconds, the client
will close the connection.
D. If a client does not receive heartbeats from EMS server for a period exceeding 20 seconds, the client
will close the connection.
Answer: A,D

Tibco   TB0-120 examen   TB0-120   TB0-120   certification TB0-120   TB0-120

NO.4 A dynamic queue named q1 has been created by an EMS client.
What will be the result of executing the following command: create queue q1?
A. The command will fail saying the queue already exists.
B. The command will fail if queue has connected receivers.
C. The command will succeed and queue will be promoted to static.
D. The command will succeed and dynamic queue will be renamed.
Answer: C

Tibco   certification TB0-120   TB0-120   TB0-120 examen   TB0-120

NO.5 Which two conditions can cause messages in a queue to be moved to the undelivered queue? (Choose
two.)
A. The number of delivery attempts has reached the limit defined for the queue.
B. The number of pending messages has reached the limit defined for the queue.
C. The length of time the message has been retained in the queue has exceeded the limit defined for the
queue.
D. The overflow policy for the queue has been set to discard the oldest messages.
Answer: A,C

Tibco   certification TB0-120   TB0-120   TB0-120

NO.6 Which command displays message count delivered to a queue receiver?
A. Show consumers
B. Show receivers
C. Show connections
D. Show users
Answer: A

Tibco   TB0-120   certification TB0-120

NO.7 Which two statements are true about the listen parameter? (Choose two.)
A. The listen parameter is set in the tibemsd.conf file.
B. Multiple listen parameters can be set in the TIBCO EMS configuration file.
C. TCP is the only protocol supported in the listen parameter.
D. The listen parameter is set in the transports, conf file.
Answer: A,B

Tibco examen   TB0-120   certification TB0-120   certification TB0-120

NO.8 How does a backup fault-tolerant server detect a failure of the primary fault-tolerant server?
A. TCP heartbeats sent from the primary server
B. TCP heartbeats sent from the backup server
C. Multicast heartbeats sent from the primary server
D. Multicast heartbeats sent from the backup server
Answer: A

Tibco   TB0-120   TB0-120   TB0-120

NO.9 Which command creates a connection factory of type queue?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Tibco   certification TB0-120   TB0-120   certification TB0-120

NO.10 Which two statements are true about selector functions? (Choose two.)
A. A selector's conditional expression can refer to values of the message body.
B. They are available for use in the bridging functions, helping to reduce unnecessary network traffic.
C. They are useful when used in conjunction with topic browser functions.
D. They are available to control the flow of messages along a route.
Answer: B,D

Tibco   TB0-120   TB0-120   TB0-120

NO.11 Atopic sales, topic is bridged to two queues: FINANCE.Q and AUDIT.Q. Ten messages are sent on the
topic SALES.TOPIC. A consumer reads ten messages from FINANCE.Q.
How many messages are now in the AUDIT.Q?
A. zero
B. five
C. ten
D. twenty
Answer: C

certification Tibco   TB0-120   TB0-120   TB0-120 examen   certification TB0-120

NO.12 Which three commands will update EMS configuration files when an exclusive commit command is
issued from EMS? (Choose three.)
A. set server client trace=enabled
B. set server password=password
C. set server authorization=enabled
D. set server track_message_ids=enabled
E. set server routing=enabled
Answer: B,C,D

Tibco examen   TB0-120   TB0-120   TB0-120 examen

NO.13 When a single message consumer is connected with an EMS server, which action can be used to
improve message consumption?
A. Enabling automatic acknowledge of all messages by the session
B. Changing delivery mode from PERSISTENT to NON_PERSISTENT
C. Increasing the prefetch value
D. Creating another instance of EMS server
Answer: C

Tibco examen   TB0-120   TB0-120 examen   TB0-120

NO.14 The company naming standard states that all queue names must start with the letter C.
How can the administrator of the EMS server enforce this naming standard for dynamic queues?
A. By disabling creation of dynamic destinations in the tibemsd.conf file
B. By changing create-destination permission for users
C. By having c. > as the only entry with a wildcard in the queues.conf file
D. By setting a rule to add c. as a prefix to all dynamic queues
Answer: C

certification Tibco   TB0-120   TB0-120

NO.15 Which two actions are most likely to improve EMS server performance.? (Choose two.)
A. Adding an additional CPU to the server running EMS
B. Improving physical disk performance
C. Switching from a file-based store to a database store
D. Increasing network I/O capacity on the server
Answer: B,D

Tibco examen   TB0-120   certification TB0-120   certification TB0-120

Le test Certification Tibco TB0-120 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Tibco TB0-120. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Tibco TB0-120.