Le dernier examen Avaya 6102-1 gratuit Télécharger

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Avaya 6102-1. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

En quelques années, le test de certification de Avaya 6102-1 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Avaya 6102-1? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification 6102-1. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification 6102-1, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Le programme de formation Avaya 6102-1 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Avaya 6102-1, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Code d'Examen: 6102-1
Nom d'Examen: Avaya (Avaya Virtual Services Platform 9000 Implementation Exam)
Questions et réponses: 67 Q&As

6102-1 Démo gratuit à télécharger: http://www.pass4test.fr/6102-1.html

NO.1 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in
the existing
Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the
VSP 9000.
Which statement represents the proper order for configuring a new VRF?
A. Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new
VRF.
B. Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new
VRF.
C. Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new
VRF.
D. Create VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP
address.
Answer: D

Avaya   6102-1   6102-1   certification 6102-1   6102-1

NO.2 Avaya recommends that the Switch Fabric (SF) modules be installed in both Slot SF1
and Slot SF4.
What is the reason behind this recommendation?
A. It provides optimal load balancing between the SF modules.
B. It provides redundancy tor the bandwidth management.
C. It takes full advantage of the orthogonal midplane architecture.
D. It provides redundancy in case of a power supply failure.
E. It provides lossless SF failover.
Answer: B

Avaya examen   6102-1   certification 6102-1   6102-1

NO.3 A customer is mirroring multiple ports to a single monitor port.
What happens if the mirrored traffic exceeds the bandwidth of the monitor port?
A. The traffic will be buffered until there is available bandwidth.
B. The excess traffic will be dropped randomly.
C. The excess traffic will be dropped based upon the mirror priority of the ingress port.
D. The excess traffic will be dropped based upon the port priority of the ingress port.
Answer: B

certification Avaya   6102-1   6102-1   6102-1 examen

NO.4 Which types of packets will port mirroring not capture.?
A. Packets that are dropped on the ingress MAC
B. Packets that are destined for the standby CP
C. Packets that are properly forwarded through the VSP
D. Packets that have a destination address of 255.255.255.255
Answer: A

Avaya examen   6102-1   6102-1

NO.5 Which command can be used to determine the management IPv6 address on the
Virtual Services
Platform (VSP) O000?
A. Show interfaces mgmtEthernet 1/1
B. Show ip interface vrf mgmtRouter
C. Show ipv6 interface vrf mgmtRouter
D. Show ipv6 address interface
Answer: D

Avaya examen   6102-1   certification 6102-1   certification 6102-1

NO.6 Given the following ACL applied to an interface:
filter acl ace 1 5 name "xxxx" filter acl ace action 1 5 deny
filter acl ace ip 1 5 ip-protocol-type eq tcp
filter acl ace protocol 1 5 dst-port eq 23
filter acl ace 1 5 enable
What is the result of this filter?
A. permit telnet traffic
B. deny ftp traffic
C. permit only tcp traffic
D. deny telnet traffic
E. deny only tcp traffic
Answer: D

Avaya   6102-1   6102-1   6102-1

NO.7 Internet Group Management Protocol (IGMP) is used by the IP Multicast router, to
learn about the
existence of host group members on their directly attached subnets.
Which statement about IGMP is true?
A. The IP Multicast routers get this information by listening for IP hosts broadcasting IGMP
queries and
reporting their host group memberships.
B. The IP Multicast routers get this information by broadcasting IGMP queries and listening
for IP hosts
reporting their host group memberships.
C. The IP Multicast routers get this information by recognizing the modified MAC address of a
Multicast
packet and adding that MAC address to the Multicast tree.
D. The IP Multicast routers get this information by listening for Multicast Servers broadcasting
IGMP
queries and listening for IP hosts reporting their host group memberships.
Answer: B

Avaya   6102-1   6102-1   certification 6102-1

NO.8 A Split Multi Link Trunking (SMIT) for switch clustering is being configured.
Which statement is a configuration requirement for the SMIT?
A. The CP-Limit is configured on edge switch stacks.
B. VLANs that are defined on the SMLT are also defined on the tote IST.
C. Neighboring edge switch stacks should be connected to each other via the DMLT
connection to add
resilient paths in the event of an SMLT failure.
D. Alternate the primary path of the SMLT connection Lo load balance the switch core.
Answer: B

certification Avaya   6102-1   6102-1   certification 6102-1   6102-1

NO.9 A Virtual Services Platform (VSP) 9000 chassis has the following connections:
Four 10GBaseER core connections in ports 3/4 , 3/8, 4/4, 4/8 (9024XL cards)
40 Copper 100BaseT connections for server aggregation (9048GT card)
How many Switch Fabric (SF) modules need to be installed in the roar of the chassis to
ensure that all of
the IO cards operate at full performance, even if a single SF modules fails (n + 1 SF
redundancy)?
A. Install three SFs in St modules 1, 2, 4.
B. Install four SFs in SF modules 1, 2, 3, 4.
C. Install five SFs in SF modules 1, 2, 3, 4, 5.
D. Install six SFs in SF modules 1, 2, 3, 4, 5, 6.
Answer: D

certification Avaya   6102-1   6102-1 examen   6102-1   6102-1 examen   6102-1

NO.10 Which two management ports are available on the CP module? (Choose two.)
A. Serial interface
B. USB (host) interface
C. Ethernet interface
D. Modem interface
Answer: A,D

Avaya examen   6102-1 examen   6102-1 examen   6102-1

Pass4Test vous promet de vous aider à passer le test Avaya 6102-1, vous pouvez télécharger maintenant les Q&As partielles de test Avaya 6102-1 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.